Centrifugal Juice extractors are generally the least costly type of electric juicer. All of them work on the very same principle in that the feature a spinning mesh basket that’s designed to extract the juice from fruits and vegetables. Typically, there is a vertical tube that you feed the vegetables or fruits into. Whenever you drop food into this tube, the food touches the foot of the rotating basket where it’s grated into tiny pieces. Due to the fact that the basket rotates at a very high RPM (revolutions per minute), these tiny pieces are cast against the basket sides and the juice is squeezed out by centrifugal force. The remaining pulp is then contained either within the unit or expelled from it, depending upon the style.
Centrifugal juice extractors have some pros and cons. On the pro side, they’re fairly affordable, ranging in cost from as low as $40 to over $200 for high-end models. They usually work well for most fruits and vegetables. Nonetheless, here are a few possible downsides of a centrifugal juice extractor. First, they are ineffective for juicing leafy greens or wheatgrass. Second, since they spin at high RPM, the juice can get foamy and therefore it oxidizes rapidly. When the juice oxidizes, lots of the enzymes are destroyed, so the overall health benefits are diminished. Lastly, some designs might be a bit harder to clean and all models need the basket to be cleaned instantly to ensure that the mesh screen doesn’t get clogged.
When shopping for a centrifugal juice extractor, here are some things to keep in mind. Some models feature continuous pulp ejection. This is really a great feature if you are going to do lots of juicing. If the juice extractor doesn’t feature continuous pulp ejection, then you would find yourself needing to turn off the machine a few to times to clean out the pulp when making batches of juice. The size of the feeder tube ought to be regarded also. Some designs include a little feeder tube. With a little feeder tube, you need to cut up the fruits and vegetables into small enough sections so that they fit into the tube. Bigger feeder tubes let you fit in bigger pieces and saves you time with prepping.